2011 Acura RL Owner's Manual - Page 158

Ignition Switch LOCK (0) You can insert or remove the built-in key only in this position. To turn the ignition switch to the LOCK (0) position, the shift lever must be in Park, and you must push the knob or built-in key in slightly. If the front wheels are turned, the anti-theft lock may make it difficult to turn the ignition switch. Firmly turn the steering wheel to the left or right as you turn the ignition switch. ACCESSORY (I) You can operate the audio system and the accessory power sockets in this position. When you turn the ignition switch to the ACCESSORY (I) position, an ''ACCESSORY (I) POSITION'' message is shown on the multiinformation display. ON (II) This is the normal ignition switch position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch from the ACCESSORY (I) to the ON (II) position. START (III) Use this position only to start the engine. The switch returns to the ON (II) position when you let go of the ignition switch. If you open the driver's door and leave the ignition switch in the ACCESSORY (I) or LOCK (0) position, you will hear a reminder beeper, and a message appears on the multi-information display according to the ignition switch position. When the ignition switch is in the ACCESSORY (I) position, a ''RETURN IGNITION SWITCH TO LOCK (0) POSITION'' message is shown on the multi-information display. When the ignition switch is in the LOCK (0) position, a ''REMOVE KEY'' message is shown on the multi-information display. The shift lever must be in Park before you turn the ignition switch knob to the LOCK (0) position or remove the built-in key from the ignition switch. 152