2011 Acura RL Owner's Manual - Page 189

Front Seat Heaters and Seat Ventilation Passenger's seat FRONT SEAT HEATER AND SEAT VENTILATION BUTTON BUTTONS When you press the button once, the heater is set to HI. After the seat reaches a comfortable temperature, select MID or LOW by pressing the button. This will keep the seat warm. To shut down the heater, press the button until the indicators go off. In HI, when the seat gets warm, the heater will change to MID after about 5 minutes. In MID, the heater will change to LOW after about 60 minutes. In LOW, the heater runs continuously. Instruments and Controls HEATERS Driver's seat BUTTON INDICATORS If equipped Both front seats are equipped with seat heaters and an air ventilation system. The passenger seat only has heaters in the seat bottom because of the side airbag system. The ignition switch must be in the ON (II) position to use the heaters and the air ventilation system. To use the heaters, press the button. The indicator (red) next to the button will come on. There are four settings in the heaters: HI Three indicators on. MID Two indicators on. LO One indicator on. OFF All indicators off. CONTINUED 183