2011 Acura RL Owner's Manual - Page 479

Lights 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the fog lights to test the new bulb. 8. Reinstall the two undercover bolts on the side under cover and tighten them securely. Put the holding clip back on the side undercover and push on the center until it locks (the center is flush with the head). MOUNTING NUT MAINTENANCE LID TAIL LIGHT TRIM Maintenance BOLTS Replacing a Rear Turn Signal Light Bulb 1. Open the trunk lid, and remove the left or right maintenance lid. 2. Remove the mounting nut with an 8 mm wrench. 3. Carefully pry in the top or bottom edge of the trim with a small flattip screwdriver, and pull the trim straight back. 4. Remove the two mounting bolts with an 8 mm wrench. 5. Pull the taillight assembly straight back out of the body. CONTINUED 473