2011 Acura RL Owner's Manual - Page 222

Audio System SKIP (SEEK) The skip (seek) function searches up and down from the current frequency to find a station with a strong signal. To activate it, press either side ( or ) of the SKIP bar, then release it. You can also activate the skip function (SEEK is displayed on the screen) by pushing the interface selector to the right or left. TUNE ICON SCAN ICON the SCAN button, then release it. To scan with the interface dial, push the selector down, and then push it to the right. You will see SCAN flashing on the screen and the upper display. The system will scan for a station with a strong signal. When it finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the scan button again, or push the interface selector to the right again. TUNE Use the TUNE bar to tune the radio to a desired frequency. Press the right side of the bar to tune to a higher frequency, or the left side to tune to a lower frequency. To tune with the interface dial, push the selector down, and turn the knob to the TUNE icon. Then press ENTER on the selector, and turn the knob to the desired frequency. To exit the TUNE mode, press ENTER on the selector, then push the selector up. SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press 216