2011 Acura RL Owner's Manual - Page 244

Audio System Manufactured under license under U.S. Patent 's: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. 1996-2008 DTS, Inc. All Rights Reserved. You cannot load and play 3-inch (8-cm) discs in this system. Loading Discs in the Changer To load multiple discs in one operation: 1. With the ignition switch in the ACCESSORY (I) or ON (II) position, press and hold the LOAD button until you hear a beep. You will see ''LOAD'' on the upper display. 2. Insert the disc into the disc slot when the disc load indicator turns green and ''LOAD'' appears in the upper display at the same time. Insert it only halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' on the upper display, and the disc load indicator turns red again and blinks as the disc is loaded. 3. When the disc load indicator turns green and ''LOAD'' appears on the upper display again, insert the next disc in the slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 4. Repeat this until all six positions are loaded. If you are not loading all six positions, the system will then begin playing the last disc loaded. If you stop loading discs before all six positions are filled, the system will wait for 15 seconds, stop the load operation, and begin playing the last disc loaded. To load a single disc: 1. Press and release the LOAD button on the changer unit. You will see ''BUSY'' on the upper display, and the disc load indicator turns red and starts blinking. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. 238