1998 Chevrolet Corvette Owner's Manual - Page 280
1998 Chevrolet Corvette Manual
Page 280 highlights
Front n r n Signal Lamps 1. Remove the front fascia close out panel attaching bolts. 2. Remove the front fascia close out panel. 3. Grasp the cooling duct and pull to release it from the front fascia, then reposition it. This will give you better access to the bulb. Rear n r n Signal and Taillamps 4. Squeeze the tab on the socket and turn it to the left (counterclockwise) to removethe socket with the bulb. 5. Remove the bulb from the socket. 6. Reverse the steps with a new bulb. Front Sidemarker Lamps 1. Follow Steps 1 through 3 in "Front Turn Signal Lamps" described previously. 2. Turn the socket one-quarter of a turn to the left and pull it out. 3. Pull the bulb straight out of the socket. A. Back-up Lamp B. Inboard Taillamp C. Outboard Taillamp 4. Reverse the steps with a new bulb. 6-35