2010 Chevrolet Camaro Owner's Manual - Page 200
2010 Chevrolet Camaro Manual
Page 200 highlights
8-24 Driving and Operating 6. Release the lever. 7. After the vehicle has been moved, align the shift lock manual release cover plate and install the retainer so the automatic transmission can operate properly. 8. Place the console trim panel in the original position, aligning the fasteners on the trim panel with the slots in the console. Press in the side trim until it clicks in place. The transmission selector locks if it is moved back to the P (Park) position. Parking If the vehicle has a manual transmission, before getting out of the vehicle, move the shift lever into R (Reverse), and firmly apply the parking brake. Once the shift lever has been placed into R (Reverse) with the clutch pedal pressed in, turn the ignition key to LOCK/OFF, remove the key and release the clutch. If parking on a hill, or if the vehicle is pulling a trailer, see Driving Characteristics and Towing Tips on page 8-49. 3. Remove the retainer and the shift lock manual release cover. 4. Push and hold the manual release lever toward the rear of the vehicle. 5. Press the select button and move the transmission gear selector to the N (Neutral) position. Parking Over Things That Burn { WARNING Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.