2010 Chevrolet Camaro Owner's Manual - Page 271

Vehicle Care 9-39 Daytime Running Lamps (DRL) The up-level model vehicle may have daytime running lamps which would be located on the facia. To replace one of these bulbs: 3. Push in the new bulb assembly to lock it into place. 4. Reconnect the electrical connector to the bulb assembly. The base model vehicle daytime running lamps are the low beam on the halogen headlamp. If one these lamps fail, see Headlamps, Front Turn Signal and Parking Lamps (Base Vehicle) on page 9-37 or Headlamps, Front Turn Signal and Parking Lamps (Up-Level Vehicle) on page 9-38 for replacement information. 3. Disconnect the wiring harness and turn the bulb socket counterclockwise to remove it from the headlamp assembly. 4. Pull the bulb straight out from the socket. 5. Push the new bulb into the socket and reinstall the socket into the headlamp assembly by turning it clockwise. 6. Reconnect the electrical connector. 7. Pull the duct back out of the air cleaner/filter housing until the tabs snap the duct back into position. 1. Locate the bulb assembly under the front facia. 2. Disconnect the electrical connector from the bulb assembly and pull out the bulb assembly.