2010 Chevrolet Camaro Owner's Manual - Page 318

9-86 Vehicle Care { WARNING Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 7. Connect one end of the black negative (-) cable to the negative (-) terminal of the good battery (C). 8. Connect the other end of the black negative (-) cable to the negative (-) post (D). 9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes. 10. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. Jumper Cable Removal A. Heavy, Unpainted Metal Engine Part or Remote Negative (-) Terminal B. Good Battery or Remote Positive (+) and Remote Negative (-) Terminals C. Dead Battery or Remote Positive (+) Terminal 5. Connect one end of the red positive (+) cable to the jump start positive (+) post (A). 6. Connect the other end of the red positive (+) cable to the positive (+) terminal of the good battery (B).