2010 Chevrolet Camaro Owner's Manual - Page 258

9-26 Vehicle Care 6. Replace the cap and completely tighten it. 7. Remove the cap again and look at the fluid level on the dipstick. How to Check Power Steering Fluid Check the level after the vehicle has been driven for at least twenty minutes so the fluid is warm. To check the power steering fluid: 1. Turn the ignition key to LOCK/OFF and let the engine compartment cool down. 2. Remove the engine cover. Refer to Engine Cover on page 9-9. 3. Wipe the cap and the top of the reservoir clean. 4. Turn the cap counterclockwise and pull it straight up. 5. Wipe the dipstick with a clean rag. Washer Fluid What to Use When windshield washer fluid is needed, be sure to read the manufacturer's instructions before use. If operating vehicle in an area where the temperature can fall below freezing, use a fluid that has sufficient protection against freezing. When the engine is hot, the level should be at the hot MAX level. When the engine is cold, the fluid level should be between MIN and MAX on the dipstick. Adding Washer Fluid What to Use To determine what kind of fluid to use, see Recommended Fluids and Lubricants on page 10-7. Always use the proper fluid. Open the cap with the washer symbol on it. Add washer fluid until the reservoir is full. See Engine Compartment Overview on page 9-6 for reservoir location.