2010 Chevrolet Camaro Owner's Manual - Page 272

9-40 Vehicle Care The up-level vehicle will not be equipped with fog lamps. 4. Pull the old bulb straight out of the bulb socket. 5. Push the new bulb straight into the bulb socket until it clicks. 6. Turn the bulb socket clockwise to reinstall. Fog Lamps The base model vehicle may have fog lamps which would be located on the facia. To replace one of these bulbs: Taillamps, Turn Signal, and Stoplamps To replace a taillamp, turn signal, or stoplamp bulb: 1. Open the trunk. See Trunk on page 1-8. License Plate Lamp To replace one of these bulbs: 1. Locate the bulb assembly under the front facia. 2. Disconnect the electrical connector from the bulb assembly and pull out the bulb assembly. 3. Push in the new bulb assembly to lock it into place. 4. Reconnect the electrical connector to the bulb assembly. 2. Remove the close out panel retainers to gain access to the bulb socket connectors. 3. Turn the bulb socket counterclockwise to remove it. 1. Unclip the license plate lamp from the facia opening. 2. Pull the license plate lamp down through the facia opening.