2012 Chevrolet Corvette Owner's Manual - Page 120
2012 Chevrolet Corvette Manual
Page 120 highlights
5-6 Instruments and Controls To adjust for compass variance: 1. Find your current location and variance zone number on the zone map that follows. Clock To set the clock: 1. Press and hold H until the correct hour displays. 2. Press and hold M until the correct minute displays. The clock mode automatically times out with the changed display format set as the current default setting. To set the clock on a navigation system, see the separate navigation manual. Remove the cover to access and replace when not in use. { WARNING Power is always supplied to the outlets. Do not leave electrical equipment plugged in when the vehicle is not in use because the vehicle could catch fire and cause injury or death. Notice: Leaving electrical equipment plugged in for an extended period of time while the vehicle is off will drain the battery. Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 20 ampere rating. Power Outlets 2. Press and hold P until a Z and a zone number displays. The compass is now in zone mode. 3. Once the zone number displays, press P repeatedly until you reach the correct zone number. Stop pressing P and the mirror returns to normal operation. The accessory power outlet can be used to plug in electrical equipment, such as a cell phone or MP3 player. The accessory power outlet is located inside the center console storage compartment, on the forward left side.