2012 Chevrolet Corvette Owner's Manual - Page 38

2-6 Keys, Doors, and Windows 1. The vehicle must be off. 5. Turn the key five times within five seconds. 6. The DIC message displays OFF-ACCESSORY TO LEARN. 7. Press Acc. on the ignition switch. 8. The DIC reads WAIT 10 MINUTES and counts down to zero. 9. The DIC displays OFF-ACCESSORY TO LEARN again. 2. Place the new transmitter in the glove box transmitter pocket with the buttons facing the passenger side. 3. Insert the vehicle key into the key cylinder located above the license plate. 4. Open the hatch/trunk. 10. Press Acc. on the ignition switch. 11. Steps 8, 9, and 10 will be repeated two more times. 12. A beep sounds and the DIC reads READY FOR FOB #1. All previously known transmitter programming has been erased. Programming without a Recognized Transmitter This procedure requires three 10-minute cycles to complete the programming process. United States owners are permitted to program a new transmitter to their vehicle when a recognized transmitter is not available. The Canadian immobilizer standard requires that Canadian owners see their dealer for programming new transmitters when two recognized transmitters are not available.