2012 Chevrolet Corvette Owner's Manual - Page 184

6-2 Lighting Exterior Lamps Off Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver door is opened with the ignition off. Flash-to-Pass To use the flash-to-pass feature, briefly pull the turn signal lever toward you. The high-beam indicator flashes to indicate to the other driver that you intend to pass. If the low-beam headlamps are off and the fog lamps are on, the fog lamps flash. . The transmission is not in P (Park) or the parking brake is off. The parking brake is off or the vehicle speed is greater than 13 km/h (8 mph). . Headlamp High/ Low-Beam Changer To change the headlamps from low beam to high, push the turn signal lever all the way forward. To change from high to low beam, pull the lever rearward. Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada. The DRL system makes the front turn signal lamps come on when the following conditions are met: When DRL are on, only the front turn signal lamps will be on. The parking lamps, taillamps, instrument panel lights, or other exterior lamps will not be on when the DRL are being used. When it is dark enough outside, the front turn signal lamps turn off and the normal low-beam headlamps turn on. When it is bright enough outside, the regular lamps go off, and the front turn signal lamps will take over. If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. Once the vehicle leaves the garage, it takes approximately one minute for the automatic headlamp system to change to DRL if it is light While the high beams are on, this light on the instrument cluster will also be lit. . It is still daylight and the ignition is on. The exterior lamp control is in the AUTO position. .