2012 Chevrolet Corvette Owner's Manual - Page 311

Vehicle Care Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates can cause a brake squeal when the brakes are first applied or lightly applied. This does not mean something is wrong with the brakes. Brake linings should always be replaced as complete axle sets. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. . 10-35 Make sure that the brakes have been given sufficient time to cool and then set the park brake. Brake Wear (ZR1, Z06, and Grand Sport Only) The ZR1, Z06, and Grand Sport models do not have built-in brake pad wear indicators and periodic visual inspection of the brake pads is required to determine when to replace the brake pads. . Front Brake pads can be visually inspected through the wheel by inspecting the outer brake pads at each wheel. Brake pads should be replaced when worn to 2 mm of pad thickness. New pads are 10 mm thick. In addition, brake pad inspection is required any time the tires are removed. . Rear .