2012 Chevrolet Corvette Owner's Manual - Page 182

5-68 Instruments and Controls Reprogramming Universal Home Remote Buttons Any of the three buttons can be reprogrammed by repeating the instructions. For help or information on the Universal Home Remote System, call the customer assistance phone number under Customer Assistance Offices (U.S. and Canada) on page 13‑5 or Customer Assistance Offices (Mexico) on page 13‑6. Universal Remote System Operation Press and hold the appropriate button for at least one-half second. The indicator light comes on while the signal is being transmitted. Operation can occur: . Erasing Universal Home Remote Buttons The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code on the Universal Home Remote device: 1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located directly above the buttons, begin to blink rapidly. 2. Once the indicator lights begin to blink, release both buttons. The codes from all buttons are erased. If the vehicle is in accessory mode. If the vehicle is running. If the vehicle is in Retained Accessory Mode (RAP). See Retained Accessory Power (RAP) on page 9‑24 for more information. Up to an additional 10 minutes after RAP finishes. Up to 10 minutes after any door is opened. . . . .