2012 Chevrolet Corvette Owner's Manual - Page 181

Instruments and Controls Now press one button on the Universal Home Remote for each switch setting as follows: . 5-67 If you wrote "Left," press the left button (A) in the vehicle. If you wrote "Right," press the right button (C) in the vehicle. If you wrote "Middle," press the middle button (B) in the vehicle. 8. Immediately release the button when the garage door moves. The indicator light blinks rapidly until programming is complete. 9. Press and release the same button again. The garage door should move, confirming that programming is successful and complete. To program another Fixed Code device such as an additional garage door opener, a security device, or home automation device, repeat Steps 1 through 9, choosing a different button in Step 7 than what was used for the garage door opener. . . A. Left Button (Up, +, or On) B. Middle Button (Middle, 0, or Neutral) C. Right Button (Down, -, or Off) 5. The indicator lights blink slowly. Enter each switch setting from Step 3 into the vehicle's Universal Home Remote. You have two and one-half minutes to complete Step 5. 6. After entering all of the switch positions, again, firmly press and release all three buttons at the same time. The indicator lights turn on. 7. Press and hold the button that will be used to control the garage door until the garage door moves. The indicator light above the selected button should slowly blink. This button may need to be held for up to 55 seconds.