2012 Chevrolet Corvette Owner's Manual - Page 322
2012 Chevrolet Corvette Manual
Page 322 highlights
10-46 Vehicle Care 5. Push the new bulb in the bulb socket until it snaps into place. 6. Reinstall the lamp assembly by first lining up the tabs on the bottom of the lamp assembly with the tabs in the vehicle, then slide it in. 7. Replace the screw at the top of the lamp assembly. Taillamps, Turn Signal, and Stoplamps To replace a stoplamp, taillamp/turn signal bulb: 1. Remove the screw from the top of the lamp assembly. Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. Replacement Bulbs Exterior Lamp Front Parking/ Turn Signal Headlamp, High‐Beam Lamp 2. Tilt the lamp assembly toward you. 3. Turn the bulb socket one-quarter turn counterclockwise and pull it out. 4. Pull the bulb straight out to remove it from the socket. Sidemarker Lamp Stoplamp/Taillamp/ Turn Signal Lamp Bulb Number 5702KA H9 194LL (W3W) 3047K For replacement bulbs not listed here, contact your dealer.
![](/manual_guide/autos/2012-chevrolet-corvette-owners-manual-c61d856/322.png)