2012 Chevrolet Corvette Owner's Manual - Page 39
2012 Chevrolet Corvette Manual
Page 39 highlights
Keys, Doors, and Windows 13. A beep sounds once programming in complete. The DIC displays READY FOR FOB #2. To program additional transmitters, take transmitter 1 out of the transmitter pocket and place transmitter 2 in the pocket. Up to four transmitters can be programmed. The DIC then displays MAXIMUM NUMBER OF FOBS LEARNED and exits the programming mode. Press Acc. on the ignition switch to complete the process. 14. Press Acc. on the ignition switch if programming is complete. 15. Press K on each newly programmed transmitter to complete the process. 2-7 Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO FOBS DETECTED when trying to start the vehicle. To start the vehicle, place the transmitter in the glove box transmitter pocket with the buttons facing the passenger side. Then, with the vehicle in P (Park) for an automatic transmission, press the brake pedal and /. If the vehicle has a manual transmission, press the clutch and /. Replace the transmitter battery as soon as possible. Change the transmitter battery if the DIC displays FOB BATTERY LOW. 1. Separate the transmitter with a flat, thin object inserted into the slot on the side or back of the transmitter. 2. Remove the old battery. Do not use a metal object. 3. Insert the new battery, positive side facing down. Replace with a CR2032 or equivalent battery. 4. Reassemble the transmitter. Battery Replacement Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter.
![](/manual_guide/autos/2012-chevrolet-corvette-owners-manual-c61d856/39.png)