2014 Chrysler Town & Country Owner Manual - Page 21

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 power liftgate are disabled. The Vehicle Security Alarm To Arm The System provides both audible and visible signals, for the first Follow these steps to arm the Vehicle Security Alarm: three minutes, the headlights will turn on, the park lamps and/or turn signals will flash and Vehicle Security Light 1. Remove the key from the ignition system (refer to ЉStarting ProceduresЉ in ЉStarting And OperatingЉ for will flash repeatedly and the horn will sound. For an further information). additional 15-minutes, only the headlights, park lamps and/or turn signals and Vehicle Security Light will flash. • For vehicles equipped with Keyless Enter-N-Go™, make sure the vehicle ignition system is OFF. Rearming Of The System • For vehicles not equipped with Keyless Enter-NThe Vehicle Security Alarm will rearm itself after the 15 Go™, make sure the vehicle ignition system is OFF additional minutes of headlights and Vehicle Security and the key is physically removed from the ignition. Light flashing, if the Vehicle Security Alarm has not been disabled. If the condition which initiated the alarm is still 2. Perform one of the following methods to lock the present, the Vehicle Security Alarm will ignore that vehicle: condition and monitor the remaining doors and ignition. • Push LOCK on the interior power door lock switch with the driver and/or passenger door open. 2