2014 Chrysler Town & Country Owner Manual - Page 225

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 To disable another RKE transmitter linked to either • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) rearMemory Position, repeat Steps 1 to 5 for each RKE ward if the driver seat position is greater than or equal transmitter. to 2.7 in (67.7 mm) forward of the rear stop. The seat NOTE: Once programmed, all RKE transmitters linked will return to its previously set position when you to memory can be easily enabled or disabled at one time. insert the key into the ignition switch and turn it out of Refer to "Electronic Vehicle Information Center (EVIC)/ the LOCK position. Customer-Programmable FeaturesЉ in "Understanding • When you remove the key from the ignition switch the Your Instrument Panel" for further information. driver seat will move to a position 0.3 in (7.7 mm) Easy Entry/Exit Seat (Available With Memory Seat forward of the rear stop if the driver seat position is ONLY) between 0.9 - 2.7 in (22.7 - 67.7 mm) forward of the rear stop. The seat will return to its previously set This feature provides automatic driver seat positioning to position when you insert the key into the ignition enhance driver mobility when entering and exiting the switch and turn it out of the LOCK position. vehicle. The distance the driver seat moves depends on where • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) you have the driver seat positioned when you remove the forward of the rear stop. At this position, there is no key from the ignition switch. benefit to the driver by moving the seat for Easy Exit or Easy Entry. 3