2014 Chrysler Town & Country Owner Manual - Page 639

MAINTAINING YOUR VEHICLE 637 important that you use the same engine coolant (OAT • Use only high purity water such as distilled or deioncoolant conforming to MS-12106) throughout the life of ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water your vehicle. will reduce the amount of corrosion protection in the Please review these recommendations for using Organic engine cooling system. Additive Technology (OAT) engine coolant (antifreeze) that meets the requirements of Chrysler Material Stan- Please note that it is the owner's responsibility to maindard MS-12106. When adding engine coolant (antifreeze): tain the proper level of protection against freezing according to the temperatures occurring in the area where • We recommend using MOPAR® Antifreeze/Coolant the vehicle is operated. 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) that meets the requirements of Chrysler NOTE: Material Standard MS-12106. • Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could • Mix a minimum solution of 50% OAT engine coolant lead to severe internal engine damage. If any coolant is that meets the requirements of Chrysler Material Standard MS-12106 and distilled water. Use higher concenneeded to be added to the system please contact your local authorized dealer. trations (not to exceed 70%) if temperatures below −34° F (−37° C) are anticipated. 7