2014 Chrysler Town & Country Owner Manual - Page 635

MAINTAINING YOUR VEHICLE 633 attention should also be given to hood latching compo- Avoid using the wiper blades to remove frost or ice from nents to ensure proper function. When performing other the windshield. Keep the blade rubber out of contact with underhood services, the hood latch, release mechanism petroleum products such as engine oil, gasoline, etc. and safety catch should be cleaned and lubricated. NOTE: Life expectancy of wiper blades varies dependThe external lock cylinders should be lubricated twice a ing on geographical area and frequency of use. Poor year, preferably in the Fall and Spring. Apply a small performance of blades may be present with chattering, amount of a high quality lubricant, such as MOPAR® marks, water lines or wet spots. If any of these conditions Lock Cylinder Lubricant directly into the lock cylinder. are present, clean the wiper blades or replace as necessary. Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Adding Washer Fluid The fluid reservoir for the windshield washers and the rear window washer is shared. It is located in the engine compartment and should be checked at regular intervals. Operation of the wipers on dry glass for long periods Fill the reservoir with windshield washer solvent (not may cause deterioration of the wiper blades. Always use radiator antifreeze) and operate the system for a few washer fluid when using the wipers to remove salt or dirt seconds to flush out any residual water. from a dry windshield. 7