2014 Chrysler Town & Country Owner Manual - Page 472

470 STARTING AND OPERATING NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 1. Place the shift lever/shift selector in PARK, then press minutes of inactivity and the ignition will switch to the and release the ENGINE START/STOP button. OFF position. 2. The ignition switch will return to the OFF position. Keyless Enter-N-Go™ Functions - With Driver's 3. If the shift lever/shift selector is not in PARK, the Foot OFF The Brake Pedal/Clutch Pedal (In PARK ENGINE START/STOP button must be held for two Or NEUTRAL Position) seconds or three short presses in a row with the The Keyless Enter-N-Go™ feature operates similar to an vehicle speed above 5 mph (8 km/h) before the engine ignition switch. It has four positions, OFF, ACC, RUN will shut off. The ignition switch position will remain and START. To change the ignition switch positions in the ACC position until the shift lever/shift selector without starting the vehicle and use the accessories is in PARK and the button is pressed twice to the OFF follow these steps: position. If the shift lever/shift selector is not in PARK and the ENGINE START/STOP button is pressed 1. Starting with the ignition switch in the OFF position: once, the EVIC (if equipped) will display a "Vehicle 2. Press the ENGINE START/STOP button once to Not In Park" message and the engine will remain change the ignition switch to the ACC position (EVIC running. Never leave a vehicle out of the PARK displays "IGNITION MODE ACCESSORY"), position, or it could roll. To Turn Off The Engine Using ENGINE START/STOP Button