2014 Chrysler Town & Country Owner Manual - Page 486

484 STARTING AND OPERATING 3. Turn the ignition switch to the LOCK/OFF position. 4. Wait approximately 10 seconds. Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the shift 5. Restart the engine. lever is in the DRIVE position. For example, if you shift 6. Shift into the desired gear range. If the problem is no the transmission into 3 (third gear), the transmission will longer detected, the transmission will return to normal not shift above third gear (except to prevent engine overspeed), but will shift down into second and first operation. gears normally. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your You can switch between DRIVE and ERS mode at any earliest possible convenience. Your authorized dealer has vehicle speed. When the shift lever is in the DRIVE diagnostic equipment to determine if the problem could position, the transmission will operate automatically, shifting between all available gears. Tapping the shift recur. lever to the left (-) will activate ERS mode, display the If the transmission cannot be reset, authorized dealer current gear in the instrument cluster, and maintain that service is required. gear as the top available gear. Once in ERS mode, tapping the shift lever to the left (-) or right (+) will change the top available gear.