2014 Chrysler Town & Country Owner Manual - Page 224

222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. Repeat the above steps to set the next Memory 1, or 2). When a recall is cancelled, the driver's seat, and position using the other numbered Memory button or the pedals stop moving. A delay of one second will occur before another recall can be selected. to link another RKE transmitter to memory. Memory Position Recall NOTE: Pressing the mirror adjust switch will cancel the memory mirror recall. NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not To Disable RKE Transmitter Linked To Memory in PARK, a message will be displayed in the EVIC. 1. Turn the ignition switch to the OFF position and To recall the memory settings for driver one, press remove the key. MEMORY button 1 on the driver's door or the UNLOCK button on the RKE transmitter linked to memory position 1. 2. Press and release MEMORY button 1. The system will recall any memory settings stored in position 1. Wait To recall the memory setting for driver two, press for the system to complete the memory recall before MEMORY button 2 on the driver's door or the UNLOCK continuing to Step 3. button on the RKE transmitter linked to Memory Position 2. 3. Press and release the memory SET (S) button located A recall can be cancelled by pressing any of the on the driver's door. MEMORY buttons on the driver's door during a recall (S, 4. Within five seconds, press and release the UNLOCK button on the RKE transmitter.