2014 Chrysler Town & Country Owner Manual - Page 270

268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Firmly press and release the "LEARN" or "TRAIN- Reprogramming A Single HomeLink® Button ING" button. On some garage door openers/devices To reprogram a channel that has been previously trained, there may be a light that blinks when the garage door follow these steps: opener/device is in the LEARN/TRAIN mode. 1. Turn the ignition switch to the ON/RUN position. NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink® button until step after the LEARN button has been pressed. the indicator light begins to flash after 20 seconds. Do 6. Return to the vehicle and press the programmed not release the button. HomeLink® button twice (holding the button for two seconds each time). If the garage door opener/device 3. Without releasing the button proceed with "Programming A Rolling Code" step 2 and follow all remaining activates, programming is complete. steps. NOTE: If the garage door opener/device does not activate, press the button a third time (for two seconds) to Programming A Non-Rolling Code complete the training. For programming Garage Door Openers manufactured To program the remaining two HomeLink® buttons, before 1995. repeat each step for each remaining button. DO NOT 1. Turn the ignition switch to the ON/RUN position. erase the channels.