2014 Chrysler Town & Country Owner Manual - Page 353

UNDERSTANDING YOUR INSTRUMENT PANEL 351 2. Press the UP or DOWN button until the System Setup (Customer-Programmable Features) menu is reached, This compass is self-calibrating, which eliminates the then press the SELECT button. need to manually reset the compass. When the vehicle is new, the compass may appear erratic until it is calibrated. 3. Press the DOWN button until "Calibrate Compass" is You may also calibrate the compass by completing one or displayed in the EVIC then press and release the more 360-degree turns (in an area free from large metal SELECT button. or metallic objects). The compass will now function 4. Press and release the SELECT button to start the normally. calibration. The "CAL" indicator will be displayed in NOTE: A good calibration requires a level surface and an the EVIC. environment free from large metallic objects such as build5. Complete one or more 360-degree turns (in an area ings, bridges, underground cables, railroad tracks, etc. free from large metal or metallic objects) until the Manual Compass Calibration "CAL" indicator turns off. The compass will now function normally. If the compass appears erratic and the CAL indicator Automatic Compass Calibration does not appear in the EVIC display, you must put the Compass Variance compass into the Calibration Mode manually, as follows: Compass Variance is the difference between Magnetic 1. Turn ON the ignition switch. North and Geographic North. To compensate for the differences the variance should be set for the zone where 4