2009 Dodge Challenger Owner's Manual - Page 132

130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Electronic Speed Control may not engage if a different previous set speed. To do so, push the lever upward to size tire is installed on one wheel, such as the compact RESUME ACCEL and release. Then remove your foot from the accelerator pedal. spare tire. To Deactivate To Vary the Speed Setting The system will disable Electronic Speed Control without When the Electronic Speed Control is set, you can inerasing the memory if you: crease speed by pushing up and holding the lever in RESUME ACCEL. When the lever is released, a new set • Softly tap the brake pedal. speed will be established. • Press the brake pedal, or press the clutch pedal to the Tapping the lever to RESUME ACCEL once will result in floor (manual transmission). a 1 mph (1.6 km/h) speed increase. Each time the lever is • Pull the speed control lever toward you (CANCEL). tapped speed increases, so tapping the lever three times will increase speed by 3 mph (4.8 km/h), etc. Pushing and releasing the ON/OFF button or turning the ignition OFF erases the set speed from memory. To decrease speed while Electronic Speed Control is set, push down and hold the lever in SET DECEL. Release the To Resume Speed lever when the desired speed is reached, and a new set If you deactivated the Electronic Speed Control without speed will be established. erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h), you can resume the