2009 Dodge Challenger Owner's Manual - Page 174

172 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch to the ON position (Do not • Elapsed Time start the engine). • Display Units of Measure in 2. Fully depress the accelerator pedal, slowly, three times Press the SCROLL button to cycle through all the Trip within 10 seconds. Computer functions. 3. Turn the ignition switch to the OFF/LOCK position. The Trip Functions mode displays the following. NOTE: If the indicator message illuminates when you • Average Fuel Economy / Fuel Saver Mode - If start the vehicle, the oil change indicator system did not Equipped reset. If necessary, repeat this procedure. Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read "RESET" or Trip Functions Press and release the MENU button until one of the show dashes for two seconds. Then, the history informafollowing Trip Functions displays in the EVIC: tion will be erased, and the averaging will continue from the last fuel average reading before the reset. • Average Fuel Economy/Fuel Saver Mode The FUEL SAVER MODE message will display above the • Distance To Empty average fuel economy in the EVIC display. This message • Trip A will appear whenever MDS (if equipped) allows the engine to operate on four cylinders, or if you are driving • Trip B in a fuel efficient manner.