2009 Dodge Challenger Owner's Manual - Page 64
2009 Dodge Challenger Manual
Page 64 highlights
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing the LATCH-Compatible Child Restraint System We urge you to follow the manufacturer's directions carefully when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that are provided with the child restraint system. window. These tether strap anchorages are under a plastic cover with this symbol on it. Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forwardfacing toddler restraints and some rear-facing infant The rear seat lower anchorages are round bars restraints will also be equipped with a tether strap, a located at the rear of the seat cushion where it hook for attachment to the tether strap anchorage and a meets the seatback and are just visible when means of adjusting the tension of the strap. you lean into the rear seat to install the child You will first loosen the adjusters on the lower straps and restraint. You will easily feel them if you run your finger on the tether strap so that you can more easily attach the along the intersection of the seatback and seat cushion hooks or connectors to the vehicle anchorages. Next, surfaces. attach the lower hooks or connectors over the top of the In addition, there are tether strap anchorages seatcover material. Then rotate the tether anchorage behind each rear seating position located in the cover directly behind the seat where you are placing the panel between the rear seatback and the rear child restraint and attach the tether strap to the anchorage, being careful to route the tether strap to provide the