2009 Dodge Challenger Owner's Manual - Page 19

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system's memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be 3. Insert a blank integrated key into the ignition switch reprogrammed. and turn the ignition switch to the ON position within 60 seconds. After 10 seconds, a single chime will sound General Information and the Vehicle Security Light will stop flashing, turn on The Sentry Key system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is again for three seconds, and then turn off. subject to the following conditions: The new integrated key is programmed. The RKE transmitter will also be programmed during this procedure. • This device may not cause harmful interference. 2. Insert the second valid integrated key and turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound and the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. Repeat this procedure to program up to eight keys. If you • This device must accept any interference that may be received, including interference that may cause undesdo not have a programmed RKE transmitter with inteired operation. grated key, contact your authorized dealer for details. 2