2010 Hummer H3 Owner's Manual - Page 113
2010 Hummer H3 Manual
Page 113 highlights
Storage Adjusting the Crossrails To adjust the crossrails to fit a load: 4. Repeat Steps 1 through 3 to the opposite end of the crossrail. 5. Once both sides of the crossrail are loose, adjust the crossrail to the desired position. 6. Push the lever labeled "PULL" from right to left to lock the crossrail in place. 1. Turn the crossrail key counterclockwise to unlock the crossrail end cap. 2. Remove the end cap. 7. Reinstall the end cap and turn the crossrail key to lock the crossrail. 8. Repeat Steps 5 through 7 to the opposite end of the crossrail. Stop Tabs 4-5 If the vehicle has a sunroof, it has a crossrail stop tab in the siderail. This tab prevents the crossrail from being moved past the opening of the sunroof and cargo from being loaded too far forward. The vehicle may have cargo tie downs. Once the cargo is loaded onto the crossrails, use the cargo tie downs to secure it . Do not load cargo directly on the roof of the vehicle. See Vehicle Load Limits on page 9‑27 for more information. 3. Pull the lever labeled "PULL" from left to right to loosen the crossrail.