2010 Hummer H3 Owner's Manual - Page 341

Vehicle Care 10-75 Tire Changing (H3) Removing the Spare Tire and Tools The equipment needed is located in the swing-gate, behind a cover. To remove the equipment: 1. Open the tailgate. See Tailgate on page 2‑7. 8. Push, pull (A) and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable. To store the jack tool bag and jack: 1. Return the tools to the jack tool bag. 2. Secure the tool bag to the jack by securely wrapping the straps around the jack. Then, slide the straps through the rings on the bag and secure. 3. Reinstall the wing nut retainer to fasten the jack and tool bag under the rear seat. Make sure that the wing nut passes through the tool bag and the jack before tightening it. 4. Turn the wing nut retainer clockwise to secure. 2. Lift the two latches, located on the inside of the tailgate, to remove the cover.