2010 Hummer H3 Owner's Manual - Page 159

Infotainment System 7-5 Radio AM-FM Radio Finding a Station BAND: Press to select FM1, FM2, AM, XM1, if equipped, or XM2, if equipped. Manual Tuning Single CD Radio: To scan stations: 1. Press and hold t or u for more than two seconds. SC or SCAN displays and the radio beeps once. The radio goes to a station, plays for a few seconds, then goes to the next station. 2. Press t or u again or one of the pushbuttons to stop scanning presets. To scan preset stations: 1. Press and hold t or u for more than four seconds. PSC or PSCN displays and the radio beeps twice. The radio goes to a preset station, plays for a few seconds, then goes to the next preset station. 2. Press t or u again or one of the pushbuttons to stop scanning presets. Setting Preset Stations Up to 30 stations (six FM1, six FM2, and six AM, six XM1, if equipped, and six XM2, if equipped), and equalization settings for each station can be programmed on the six numbered pushbuttons. To program presets: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or XM1 or XM2. 3. Tune in the desired station. 4. Press AUTO EQ to select the equalization. 5. Press and hold one of the six numbered pushbuttons until the radio beeps once. 6. Repeat the steps for each pushbutton. e (Tune): Turn to select a radio station. Six-Disc CD Radio: DISP: Turn to select a radio station. Automatic Tuning 1-6 (Preset Pushbuttons): Press to select preset stations. Press and release to go to the previous or next station and stay there. The radio only stops at stations with a strong signal. Press and hold to scan stations or preset stations. t SEEK u :