2010 Hummer H3 Owner's Manual - Page 196

9-12 Driving and Operating 3. Apply slight pressure to the brake when the shaking or shuddering sensation is felt, keeping the vehicle moving in a controlled manner. 4. Be prepared to alternate between braking and accelerating through the adverse terrain. Controlling the vehicle is the key to successful off-road driving. One of the best ways to control the vehicle is to control the speed. At higher speeds: . For mounds, washouts, loose up-hill slopes, ditches, etc. When wheel spin occurs as the vehicle is moving, the driver may notice a slight shaking or shuddering of the vehicle. This should be stopped as soon as possible to prevent damage to vehicle components. This is the indication that a loss of traction is occurring on this terrain. The operator should: 1. Reduce speed and apply the brakes. 2. Assess the terrain properly and adjust vehicle speed and gear ranges accordingly: Four‐Wheel High position for higher speeds and Four‐Wheel‐Low Lock for more torque and lower speeds. Transmission 1 (First) gear is generally recommended. You approach things faster and have less time to react. There is less time to scan the terrain for obstacles. The vehicle has more bounce when driving over obstacles. More braking distance is needed, especially on an unpaved surface. . Getting Familiar with Off-Road Driving It is a good idea to practice in an area that is safe and close to home before you go into the wilderness. Off-roading requires some new and different skills. Tune your senses to different kinds of signals. Your eyes need to constantly sweep the terrain for unexpected obstacles. Your ears need to listen for unusual tire or engine sounds. Use your arms, hands, feet, and body to respond to vibrations and vehicle bounce. . . { WARNING When you are driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to lose control and crash. So, whether you are driving on or off the road, you and your passengers should wear safety belts.