2012 Jeep Wrangler Owner Manual - Page 172

170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Flip up the pull loop so it is perpendicular (straight DUAL TOP - IF EQUIPPED If your vehicle is equipped with a Dual Top, you must up) to the top surface of the tray. remove one of the tops from the vehicle. If the soft top 2. Pull up on the loop and twist it 90 degrees, so it is is removed, the pivot brackets must also be removed parallel to the slotted hole in the tray. from the sport bar. The soft top was installed at the factory for shipping purposes only. The soft top and the 3. Open the rear compartment cover. hard top are to be used independently. Removal is mandatory to prevent any possible wear and tear on the soft top. Your vehicle warranty will not cover damage resulting from both tops remaining on the vehicle at the same time for extended periods of time. Removing The Soft Top 1. Locate and remove the two boxes that contain the following items: • Right and left door frames Rear Storage Cover • Door frame attachment knobs (four for two-door models, six for four-door models)