2012 Jeep Wrangler Owner Manual - Page 556

554 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse M37 Mini Fuse 10 Amp Red Description Anti-Lock Brake System, Electronic Stability Control, Stop Lamp Switch, Fuel Pump Relay Lock/Unlock Motors CAUTION! (Continued) • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected. VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take steps to protect your battery. You may: • Remove Cartridge fuse #J13 in the Power Distribution Center (PDC) labeled Ignition-Off Draw (IOD) and store it in a safe location within the PDC. M38 25 Amp Natural CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. (Continued) • Or, disconnect the negative cable from the battery.