2012 Jeep Wrangler Owner Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Settings (Customer-Programmable Features)" in "UnNOTE: Pressing the LOCK button on the RKE transmitderstanding Your Instrument Panel" for further inforter while you are inside the vehicle will activate the mation. Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. • For vehicles not equipped with the EVIC, perform the Press the UNLOCK button to deactivate the Vehicle following steps: Security Alarm. 1. Press the RKE transmitter LOCK button for 4 to To Lock The Doors And Swing Gate 10 seconds. Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signals will flash and the 2. While the LOCK button is pressed (after four seconds), horn will chirp once to acknowledge the lock signal. press the RKE transmitter PANIC button. Release both buttons. Sound Horn On Lock This feature will cause the horn to chirp when the doors The "Sound Horn On Lock" feature can be reactivated by are locked with the RKE transmitter. This feature can be repeating this procedure. turned on or turned off. To change the current setting, Using The Panic Alarm proceed as follows: To turn the Panic Alarm feature on or off, press and hold • For vehicles equipped with the EVIC, refer to "Elec- the PANIC button on the RKE transmitter for at least one tronic Vehicle Information Center (EVIC)/Personal second and release. When the Panic Alarm is activated, 2