2012 Jeep Wrangler Owner Manual - Page 542

540 MAINTAINING YOUR VEHICLE Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the bottom of the hole. Add fluid, if necessary, to maintain the proper level. Frequency Of Fluid Change Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. If the fluid becomes contaminated with water, it should be changed immediately. Otherwise, change the fluid as recommended in the Maintenance Schedule. Refer to the "Maintenance Schedule" for the proper maintenance intervals. Transfer Case Fluid Level Check The fluid level should be to the bottom edge of the fill hole (A) when the vehicle is in a level position. Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole.