2012 Jeep Wrangler Owner Manual - Page 24
2012 Jeep Wrangler Manual
Page 24 highlights
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNLOCK button is pressed, the Illuminated Entry will 2. Continue to hold the RKE transmitter LOCK button for at least four seconds, but not longer than 10 seconds, initiate and the parking lights will flash twice. then press and hold the RKE transmitter UNLOCK Remote Key Unlock On First Press button. This feature lets you program the system to unlock either the driver's side, or all doors and swing gate on the first 3. Release both buttons at the same time. press of the UNLOCK button on the RKE transmitter. 4. Test this feature while outside of the vehicle by • For vehicles equipped with an Electronic Vehicle In- pressing the LOCK/UNLOCK button on the RKE transformation Center (EVIC), refer to "Electronic Vehicle mitter. Information Center (EVIC)/Personal Settings NOTE: Pressing the RKE transmitter LOCK button (Customer-Programmable Features)" in "Understandwhile you are inside of the vehicle will activate the ing Your Instrument Panel" for further information. Vehicle Security Alarm. Opening a door with the Vehicle • For vehicles not equipped with the EVIC, the Remote Security Alarm activated will cause the alarm to sound. Unlock feature can be enabled or disabled by perform- Press the RKE transmitter UNLOCK button to deactivate ing the following steps: the Vehicle Security Alarm. 1. Press and hold the LOCK button on a programmed 5. If the desired programming was not achieved or to RKE transmitter. reactivate this feature, repeat the above steps.