2012 Jeep Wrangler Owner Manual - Page 272

270 UNDERSTANDING YOUR INSTRUMENT PANEL the driver's seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt Reminder Light will flash or remain on continuously. Refer to "Occupant Restraints" in "Things To Know Before Starting Your Vehicle" for further information. checked by an authorized dealer. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate the vehicle until the cause is corrected. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. 8. Turn Signal Indicators The left or right arrow will flash with the corre10. High Beam Indicator sponding exterior turn signal lights when the turn This indicator shows that the high beam headsignal lever is operated. A chime will sound if the vehicle lights are on. Push the multifunction control lever is driven more than 1 mile (1.6 km) with either turn signal away from you to switch the headlights to high beam. on. Pull the lever toward you to switch the headlights back to NOTE: If either indicator flashes at a rapid rate, check low beam. If the driver's door is open, and the headlights for a defective outside light bulb. or park lights are left on, the high beam indicator light will remain illuminated and a chime will sound. 9. Oil Pressure Warning Light This light indicates low engine oil pressure. The light should turn on momentarily when the engine is started; if the bulb does not come on, have the system