2012 Jeep Wrangler Owner Manual - Page 289

UNDERSTANDING YOUR INSTRUMENT PANEL 287 • Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel 4. To complete the compass calibration, drive the vehicle tank level. DTE cannot be reset. in one or more complete 360-degree circles, under 5 mph (8 km/h) in an area free from power lines and large • Elapsed Time metallic objects, until the CAL indicator turns off. The Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is compass will now function normally. in the RUN or START positions. The elapsed timer Average Fuel Economy / Distance To Empty (DTE) displays minutes:seconds. After 59minutes:59seconds, it / Elapsed Time displays hours:minutes:seconds. • Average Fuel Economy Trip Conditions Shows the average fuel economy since the last reset. When the fuel economy is reset, the digits will go blank Trip Odometer (ODO) / ECO (Fuel Saver Indicator) while the history information is erased. The averaging - If Equipped will restart when enough new distance and fuel data is This display shows the distance traveled since the last reset. Press and release the right button (on the instruaccumulated. ment cluster) to switch from odometer to Trip A or Trip B 3. Release the RESET button, then press and hold again for approximately 10 seconds, until the direction is displayed, with the CAL indicator on continuously in the display. 4