2012 Jeep Wrangler Owner Manual - Page 559

MAINTAINING YOUR VEHICLE 557 Front Park/Turn Signal Front Fog Lamp 1. Remove the front grille. Turn the retainers along the 1. Reach under the vehicle to access the back of the front top 1/4 turn counterclockwise and remove. fog lamp. 2. Pull the bottom of the grille away starting at one side and working toward the other. 2. Disconnect the wire harness connector from the front fog lamp connector receptacle. 3. Turn the socket assembly 1/4 turn counterclockwise 3. Firmly grasp the bulb by the two latch features and and remove from housing. Pull the bulb straight from the squeeze them together to unlock the bulb from the back socket to replace. of the front fog lamp housing. Front Side Marker 1. Reach under the front fender flare and locate the front side marker socket. 2. Turn the socket assembly counterclockwise 1/3 turn and remove it from the housing. Pull the bulb straight from the socket to replace. 4. Pull the bulb straight out from the keyed opening in the housing and then connect the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 7