2009 Mercedes CLK-Class Owner's Manual - Page 134

Controls in detail Control system X Press button è or ÿ repeatedly until the Vehicle status message memory menu appears in the multifunction display. If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display. KEYLESS-GO start/stop button and open the driver's door. Except for high-priority messages, the vehicle status message memory will be cleared when you switch off the ignition. RVehicle submenu (Y page 138) submenu (Y page 139) RConvenience Resetting to factory settings You can reset the functions of all submenus to the factory settings. For safety reasons, the function Headlamp Mode in the Lighting submenu cannot be reset while driving. X Press button è or ÿ repeatedly until the Settings menu appears in the multifunction display. Settings menu Introduction In the Settings menu there are two functions: The function To reset, press reset button for 3 seconds, with which you can reset all the settings to the original factory settings and a collection of submenus with which you can make individual settings for your vehicle. The following settings and submenus are available in the Settings menu: RResetting to factory settings (Y page 132) RSubmenus Press button j or k. The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" (Y page 279). Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. With KEYLESS-GO, the number of messages will reappear when you turn off the engine by pressing the X in the Settings menu (Y page 133) cluster submenu (Y page 134) submenu (Y page 135) submenu (Y page 136) X RInstrument RTime/Date RLighting Press the reset button in the instrument cluster for approximately 3 seconds. The request to press the reset button once more to confirm appears in the multifunction display. Press the reset button once more. The functions of all the submenus will be reset to factory settings. X 132