2009 Mercedes CLK-Class Owner's Manual - Page 85
2009 Mercedes CLK-Class Manual
Page 85 highlights
Controls in detail Starter switch positions instrument cluster fails to come on when the ignition is switched on, have it checked and replaced if necessary. If a lamp in the instrument cluster remains on after starting the engine or comes on while driving, refer to "Lamps in instrument cluster" (Y page 308). If the SmartKey is left in starter switch position 0 for an extended period of time, it can no longer be turned in the starter switch. In this case, the steering is locked. To unlock, remove SmartKey from the starter switch and reinsert. The steering is locked when the SmartKey is removed from the starter switch. KEYLESS-GO G Observe Safety notes, see page 58. Vehicles equipped with the KEYLESS-GO feature are supplied with a SmartKey with integrated KEYLESS-GO function. With the SmartKey present in the vehicle, pressing the KEYLESS-GO start/stop button Rwithout the brake pedal depressed corresponds to the various starter switch positions (Y page 82) Rwith the brake pedal firmly depressed will start the engine (Y page 107) The function of the SmartKey overrules the KEYLESS-GO function. The SmartKey must be located in the vehicle. X Make sure the automatic transmission is in park position P. X Do not depress the brake pedal. KEYLESS-GO start/stop button 1 USA only 2 Canada only ! If the SmartKey cannot be turned in the starter switch, the vehicle battery may not be sufficiently charged. RCheck the vehicle battery and charge it if necessary. RGet a jump start. To prevent accelerated vehicle battery discharge or a completely discharged vehicle battery, always remove the SmartKey from the starter switch when the engine is not in operation. Position 0 Before you press the KEYLESS-GO start/stop button, the vehicle's on-board electronics have status 0 (as with SmartKey removed). Position 1 X Press the KEYLESS-GO start/stop button once. This supplies power for some electrical consumers, such as radio functions. Z 83