2009 Mercedes CLK-Class Owner's Manual - Page 138

Controls in detail Control system Setting daytime running lamp mode (USA only) X Move the selection marker with button æ or ç to the Lighting submenu. X Press button j or k repeatedly until the message Headlamp Mode appears in the multifunction display. The selection marker is on the current setting. Example illustration for setting the hour X Example illustration for setting the month X Press button æ or ç to set the hours or minute(s). X Press the reset button to confirm. Setting the date This function is only available in vehicles with audio system. Vehicles with COMAND system: For information on setting the date in the COMAND system, refer to the separate COMAND system operating instructions. X Move the selection marker with button æ or ç to the Time/Date submenu. X Press button j or k repeatedly until the message Set Date Month, Set Date Day, or Set Date Year appears in the multifunction display. The selection marker is on the current setting. Press button æ or ç to set the month, day, or year. Lighting submenu Access the Lighting submenu via the Settings menu. Use the Lighting submenu to change the lamp and lighting settings on your vehicle. The following functions are available: RSetting X daytime running lamp mode (USA only) (Y page 136) locator lighting (Y page 137) night security illumination (Y page 137) interior lighting delayed shut-off (Y page 138) RSetting RSetting RSetting Press button æ or ç to select manual operation (Manual) or daytime running lamp mode (Constant). With daytime running lamp mode activated and the exterior lamp switch in position M or U, the low-beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: RParking RTail lamps lamps 136