2009 Mercedes R-Class Owner's Manual - Page 154

Controls in detail Control system X Press button è or ÿ repeatedly until the Vehicle status message memory menu appears in the multifunction display. If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display: switch is turned to position 0 or removed from the starter switch. With KEYLESS-GO, the number of messages will reappear when you turn off the engine by pressing the KEYLESS-GO start/stop button and open the driver's door. Except for high-priority messages, the vehicle status message memory will be cleared when you switch off the ignition. RTime/Date RLighting RVehicle submenu (Y page 155) submenu (Y page 156) submenu (Y page 158) submenu (Y page 158) RComfort Resetting to factory settings You can reset the functions of all submenus to the factory settings. For safety reasons, the function Lamp Circuit Headlamp in the Lighting submenu cannot be reset while driving. The following message appears in the multifunction display: Settings Cannot be completely reset to factory settings while driving. X Press button è or ÿ repeatedly until the Settings menu appears in the multifunction display. Settings menu Introduction X Press button j or k. The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" (Y page 305). i After you have scrolled through all recorded status messages, the first recorded message appears again. Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter In the Settings menu there are two functions: The function To reset, press reset button for 3 seconds, with which you can reset all the settings to the original factory settings and a collection of submenus with which you can make individual settings for your vehicle. The following settings and submenus are available in the Settings menu: RResetting to factory settings (Y page 152) RSubmenus in the Settings menu (Y page 153) cluster submenu (Y page 154) RInstrument 152