2009 Mercedes R-Class Owner's Manual - Page 218

Controls in detail Loading and storing X X X Rolling out blind: Pull blind on handle 1 across the cargo compartment. Guide blind into mounts 2 and release. Rolling up blind: Disengage blind and guide retraction by its handle 1. X Installing: For installation behind second row seats, install the blind extensions (Y page 217). i To avoid loss of the covers, keep them in a safe place while not in use, e.g. the glove box. X ! For installation behind third-row seats, the blind extensions must not be installed. Otherwise, blind could be damaged. X Make sure release button 1 faces up and the roller blind handle (Y page 215) is to the rear before inserting the roller blind. Place left side of blind 2 in left mount. Position right side of blind 2 over right mount. Press release button 1 and guide blind 2 into mount. Make sure the cargo compartment cover blind is securely fastened. Removing and installing blind Remove the mount covers in the side trims of the third seat row when installing roller blind 2 behind the second-row seats. X X X X Blind installed behind second-row seats 1 Release button 2 Blind X X X Mount cover behind second-row seats X Removing: Roll up blind 2. Push release button 1. Pull blind 2 to the left until it engages. Press on cover at its lower edge as indicated by arrow. The cover's upper edge flips up. Remove cover by pulling its upper edge out of side trim in direction of arrow. X 216