2009 Mercedes R-Class Owner's Manual - Page 278
2009 Mercedes R-Class Manual
Page 278 highlights
Operation Tires and wheels Traction Force exerted by the vehicle on the road via the tires. The amount of grip provided. Vehicle maximum load on the tire Load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight and dividing it by two. Tread The portion of a tire that comes into contact with the road. Rotating tires G Warning! Rotate front and rear wheels only if the tires are of the same dimension. If your vehicle is equipped with mixed-size tires (different tire dimensions front vs. rear), tire rotation is not possible. G Warning! Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 110 lb-ft (150 Nm). Only use genuine Mercedes-Benz wheel bolts specified for your vehicle's rims. Tire rotation can be performed on vehicles with tires of the same dimension all around. If your vehicle is equipped with tires of the same dimension all around, tires can be rotated, observing a front-to-rear rotation pattern that will maintain the intended Treadwear indicators Narrow bands, sometimes called "wear bars" that show across the tread of a tire when only 1/ in (1.6 mm) of tread remains. 16 TWR (Tongue Weight Rating) Maximum permissible weight on trailer tongue. Uniform Tire Quality Grading Standards A tire information system that provides consumers with ratings for a tire's traction, temperature and treadwear. Ratings are determined by tire manufacturers using U.S. government testing procedures. The ratings are molded into the sidewall of the tire. rotation (spinning) direction of the tire (Y page 255). In some cases, such as when your vehicle is equipped with mixed-size tires (different tire dimension front vs. rear), tire rotation is not possible. If applicable to your vehicle's tire configuration, tires can be rotated according to the tire manufacturer's recommended intervals in the tire manufacturer's warranty pamphlet located in your vehicle literature portfolio. If none is available, tires should be rotated every 3 000 to 6 000 miles (5 000 to 10 000 km), or sooner if necessary, according to the degree of tire wear. The same rotation (spinning) direction must be maintained. Rotate tires before the characteristic tire wear pattern becomes visible (shoulder wear on front tires and tread center wear on rear tires). Thoroughly clean the mounting face of wheels and brake disks, i.e. the inner side of the wheels/tires, during each rotation. Check for and ensure proper tire inflation pressure. For information on wheel change, see "Flat tire" (Y page 365). 276